Contact Advantech Search Shopping list
  1. Automation: 1300-308-531 | Embedded: 1300-373-532
  2. Login
Home Motion Control Cards

Motion Control CardsHas Deleted

Advantech Encoder cards include 24-bit quadruple AB phase encoder counters, 24-bit timers/counters and digital I/O channels. Each channel accepts digital input as an index for a rotary encoder or as a home sensor input for a linear encoder. These cards lets your computer perform position monitoring for motion control systems.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 1
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardIDâ„¢ switch

AUD 1,077.00

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

AUD 1,674.00

Compare More
PCI-1245E-AE
Economic 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  4. Supports E-Gear
  5. Hardware emergency input
  6. Watchdog timer
  7. Position latch via ORG & index signal
  8. Programmable interrupt

AUD 1,129.00

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

AUD 2,277.00

Compare More
PCI-1784U-AE
4-Axis Quadrature Encoder & Counter Card
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardIDâ„¢ switch

AUD 828.00

Compare More
PCL-833-BE
3-Axis Quadrature Encoder & Counter Card
  1. 1.0 MHz max. quadrature input rate
  2. Three 24-bit counters (can cascade up to 48 bits)
  3. Optically isolated up to 2,500 VRMS
  4. 4-stage digital filter
  5. 2.4 MHz max. input pulse rate
  6. Pulse/direction and up/down counting
  7. Digital input with interrupt for each axis
  8. Programmable time-interval interrupt
  9. Half-size AT bus card

AUD 781.00

Compare More
Page 1 of 1
x
Contact Us

Automation: 1300-308-531 | Embedded: 1300-373-532

8:30 a.m.~ 5:00 p.m.

Contact Advantech