Contact Advantech Search Shopping list
  1.  
  2. Tel: 1300-308-531 | Fax: 61-3-9797-0199 |
  3. Login
Order By Part Number
Home Motion Control

Motion Control

Advantech offers application ready industrial-grade encoder input and isolated I/O cards for general motion control (GMC) applications. Advantech’s motion control cards have 3 and 4-axis inputs with pulse-type and voltage-pulse models. Advantech also provides a complete line of AMONET (Advantech Motion Network) distributed motion modules. All of the cards are supported by complete motion control libraries under DOS and Windows OS.
Results per page 9 18 | Sort by Price Highest / Lowest
Page 1 of 2
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardID™ switch

AUD 671.00

Compare More
PCI-1243U-AE
4-Axis Low Cost Stepping Motor Control Card
  1. 4 axis stepping motor control
  2. PCI universal bus
  3. Up to 400 k pulse output rate
  4. T-curve acceleration/deceleration
  5. Pulse/Dir and CW/CCW pulse output mode
  6. Up 24-bit step count
  7. Opto-Isolated Digital input and output
  8. Up to 1,500 Vrms system isolation
  9. BoardIDTM switch

AUD 425.00

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

AUD 1,041.00

Compare More
PCI-1245E-AE
Economic 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  4. Supports E-Gear
  5. Hardware emergency input
  6. Watchdog timer
  7. Position latch via ORG & index signal
  8. Programmable interrupt

AUD 703.00

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

AUD 1,415.00

Compare More
PCI-1784U-AE
4-Axis Quadrature Encoder & Counter Card
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

AUD 565.00

Compare More
PCL-833-BE
3-Axis Quadrature Encoder & Counter Card
  1. 1.0 MHz max. quadrature input rate
  2. Three 24-bit counters (can cascade up to 48 bits)
  3. Optically isolated up to 2,500 VRMS
  4. 4-stage digital filter
  5. 2.4 MHz max. input pulse rate
  6. Pulse/direction and up/down counting
  7. Digital input with interrupt for each axis
  8. Programmable time-interval interrupt
  9. Half-size AT bus card

AUD 533.00

Compare More
PCL-839+-AE
3-Axis Stepping Motor Control Card
  1. Independent, simultaneous control of three stepping motors
  2. Optically-isolated outputs
  3. Five isolated digital inputs per axis for limit switches
  4. Half-size PC add-on card
  5. Up to 200 kpps step rate
  6. 16 x DI/O

AUD 652.00

Compare More
AMAX-1240-AE
Open Frame 4-Axis Motion Module
  1. End limit logic is switchable (high or low active)
  2. BoardID is switchable
  3. Easily visible LED indicators on board to do diagnosis
  4. Direct wire to servo drive to save terminal board space while installation
  5. Max. 6.5 MHz, 4-axis pulse output
  6. 28 bits counter for incremental encoder
  7. Horizontal installation for for servo or stepping motor driver
  8. Suitable for DIN-rail mounting

AUD 887.00

Compare More
Page 1 of 2
x
Contact Advantech

Tel: 1300-308-531 | Fax: 61-3-9797-0199 |

8:30 a.m.~ 5:00 p.m.

Contact Advantech