Contact Advantech Search Shopping list
  1.  
  2. Tel: 1300-308-531 | Fax: 61-3-9797-0199 |
  3. Login
Order By Part Number
Home Motion Control Centralized Motion Control

Centralized Motion Control

Advantech’s full product offering can accommodate all your motion control needs. You can choose from 3-axis and 4-axis controllers, pulse-output or voltage-output, ISA-bus-based or PCI-bus-based, and standard PC-based or embedded in a system. The functions of the motion cards also vary from high-end 3-axis circular interpolation cards to point-to-point motion devices.
Results per page 9 18 | Sort by Price Highest / Lowest
Page 1 of 1
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardID™ switch

AUD 645.00

Compare More
PCI-1243U-AE
4-Axis Low Cost Stepping Motor Control Card
  1. 4 axis stepping motor control
  2. PCI universal bus
  3. Up to 400 k pulse output rate
  4. T-curve acceleration/deceleration
  5. Pulse/Dir and CW/CCW pulse output mode
  6. Up 24-bit step count
  7. Opto-Isolated Digital input and output
  8. Up to 1,500 Vrms system isolation
  9. BoardIDTM switch

AUD 409.00

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

AUD 1,001.00

Compare More
PCI-1245E-AE
Economic 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer for trajectory planning (circular trajectory and auto blending are not supported)
  4. Supports E-Gear
  5. Hardware emergency input
  6. Watchdog timer
  7. Position latch via ORG & index signal
  8. Programmable interrupt

AUD 676.00

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

AUD 1,360.00

Compare More
PCI-1784U-AE
4-Axis Quadrature Encoder & Counter Card
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

AUD 544.00

Compare More
PCL-833-BE
3-Axis Quadrature Encoder & Counter Card
  1. 1.0 MHz max. quadrature input rate
  2. Three 24-bit counters (can cascade up to 48 bits)
  3. Optically isolated up to 2,500 VRMS
  4. 4-stage digital filter
  5. 2.4 MHz max. input pulse rate
  6. Pulse/direction and up/down counting
  7. Digital input with interrupt for each axis
  8. Programmable time-interval interrupt
  9. Half-size AT bus card

AUD 513.00

Compare More
PCL-839+-AE
3-Axis Stepping Motor Control Card
  1. Independent, simultaneous control of three stepping motors
  2. Optically-isolated outputs
  3. Five isolated digital inputs per axis for limit switches
  4. Half-size PC add-on card
  5. Up to 200 kpps step rate
  6. 16 x DI/O

AUD 627.00

Compare More
Page 1 of 1
x
Contact Advantech

Tel: 1300-308-531 | Fax: 61-3-9797-0199 |

8:30 a.m.~ 5:00 p.m.

Contact Advantech